Grinding Mill

coarse vertical grinding mill

From:http://www.vertical-mill.net    Date:2014-11-07 10:32

Application of coarse vertical grinding mill:
coarse vertical grinding millCoarse vertical grinding mill is engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into coarse powder and small particles, it is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.

Working principle of coarse vertical grinding mill:
Coarse vertical grinding mill mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crushing. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, the proportion of water for the crushing materials is no more than 20%.

The features of coarse vertical grinding mill:
1. Uniform particle size with high crushing and crushing ratio;
2. High capacity and low power consumption;
3. Simple structure; Easy operation;  
4. Low investment and environmantal-friendly.
 
The technical data of coarse vertical grinding mill:
Type PC4008-75 PC40012-90 PC40015-132
Rotor Diameter/mm 750 900 1150
Rotor Width/mm 800 1200 1500
Rotor Speed r/min 800-1000 800-1000 550-800
Feed head size/mm 320*930 400*1200 500*1500
Feeding Size/mm ≤50 ≤60 ≤80
Finished Size/mm ≤3 ≤3 ≤8
Capacity t/h 10--30 30--60 50--100
Powder/kw 55-75 75-90 110-132
Hammer Number (piece) 18 32 32
Overall Size L*W*H/mm 2310*1665*1610 2840*2100*2020 3720*2650*2540
Note: This specification is just referencing, any changes are subject to the products.
Should you have any questions, please do not hesitate to contact us.
Phone: 0086-21-20236178 or 0086-13386218820
Contact person: Candy
E-mail: candyli@clirik.com;
Website: http://www.vertical-mill.net

上一篇:large vertical grinding mill
下一篇:ball mill