Bentonite belongs to clay rock and is an important non-metallic mineral. Its color is generally white and light yellow. Due to different impurities, it can also appear in different colors such as light gray, pink, gray black, light green, etc. It has a good Adsorptive, expansive, pulp-making and other properties, generally can be used as stabilizer, waterproof material, catalyst, suspending agent, purification and decolorization agent, etc., and has a very wide range of uses in agriculture, light industry, chemical industry and other fields.

Application field

Bentonite mill is widely used in quartz, recrystallization, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, graphite , glass, manganese ore, titanium ore, copper ore, chrome ore, refractory materials, thermal insulation materials, coal coke, coal powder, carbon black, clay, bone meal, titanium dioxide, iron oxide, etc. Mohs hardness below 9.3, humidity below 6 High-fine powder processing of more than 300 kinds of materials in the non-flammable and explosive industries such as minerals, construction, chemicals, and fertilizers. The particle size of the finished product is within the range of 60-325 mesh (0.125mm-0.044mm). The fineness of a small part of materials can reach 1000 mesh (0.013mm).

Work process

The whole structure of bentonite powder mill is composed of main engine, analyzer, pipeline device, blower, and can be equipped with crusher, hoist, electromagnetic vibrating feeder, electric control motor, etc. according to user needs. After the material is crushed to the required particle size, the material is sent to the storage hopper by the elevator, and then the material is evenly and continuously sent into the grinding chamber of the main machine through the vibrating feeder. Due to the centrifugal force during rotation, the grinding roller swings outward and is pressed tightly. 

In the grinding ring, the shovel scoops up the material and sends it between the grinding roller and the grinding ring, and achieves the purpose of crushing due to the rolling of the grinding roller. The fine powder after grinding is brought into the analyzer with the circulating air of the blower for sorting, and the over-fine material falls back for regrinding, and the qualified fine powder enters the finished cyclone powder collector along with the airflow, and is discharged through the powder outlet pipe. That is the finished product. 

In the grinding chamber, because there is a certain amount of moisture in the material to be ground, heat is generated during grinding, and the water vapor evaporates, and the joints of the pipelines of the whole machine are not tight, and the external air is sucked in, which increases the circulating air pressure and ensures that the mill works under negative pressure. , The increased air flow is discharged into the dust collector through the residual air pipe, and then discharged into the atmosphere after being purified.

Performance advantage

1. The bentonite mill adopts a vertical structure design, the floor space of the whole machine is reduced, and the maintenance and operation of the equipment are more convenient.

2. The equipment is developed according to the properties of bentonite, with strong processing capacity and high milling efficiency.

3. The wearing parts are cast with strong wear-resistant materials, the loss in the milling operation is small, the service life of the whole machine is long, and the cost is low.

4. The screening rate of the equipment can reach more than 99%, which is impossible for many equipments, and the power of the equipment motor is small, and the energy consumption is low.

5. The fully sealed method is adopted to avoid dust flying out during the bentonite grinding process, which improves the working environment and passes the environmental assessment standard.